We have been manufacturing water jetting nozzles and high pressure water pump parts to close tolerances for over 25 years, producing  Drain jets, Ball jets, High Efficiency jets and many other types of nozzles to the UK and USA for many years.

We can offer all water jetting nozzles at lower cost than most companies as we manufacture and sell directly to customers.

Attention !!

Due to the nature of the equipment being advertised here you must be aware these components operate under extremely high pressures which can cause serious injuries or death.

Do not buy unless you know how to safely operate and have an understanding of what these components can do.

We will only sell to those that understand the above information and no legal action can be taken against  I.P. Engineering if you miss use, damage, not properly maintain or use in a dangerous manor.

 

High Efficiency 'HE' Drain Jet

  • 1/2" BSP or 1/2" NPT

  • 3 rear 30° degree

  • 3 rear 30° degree 1 forward 180° degree

  • 4 rear 30° degree

  • 4 rear 30° degree 1 forward 180° degree

  • 6 rear 30° degree

  • 6 rear 30° degree 1 forward 180° degree

  • Up to 400mm (16") tube sizes

  • Max working pressure 700 bar (10,000 psi)

Small He Jet

  • 1/2" BSP

High Efficiency Cap 1/4" BSP

  • Able to attach Screma Jet

Standard Drain Jet

  • 1/2" BSP

  • 3 rear

  • 3 rear 1 forward

  • 4 rear

  • 4 rear 1 forward

  • 6 rear

  • 6 rear 1 forward

  • Up to 300mm (12") tube sizes

  • Max working pressure 700 bar (10,000 psi)

Ball Jet

  • Large 1/2" NPT

  • Small 1/4" NPT

  • 3 rear 30° degree

  • 3 rear 30° degree 1 forward 180° degree

  • 4 rear 30° degree

  • 4 rear 30° degree 1 forward 180° degree

  • 6 rear 30° degree

  • 6 rear 30° degree 1 forward 180° degree

  Ball Jet

  • Large 3/8" BSPM

  • Small 1/4" BSPM

  • 3 rear 30° degree

  • 3 rear 30° degree 1 forward 180° degree

  • 4 rear 30° degree

  • 4 rear 30° degree 1 forward 180° degree

  • 6 rear 30° degree

  • 6 rear 30° degree 1 forward 180° degree

  Rotary 'Screma' Jet

  • 16mm O/D

  • 1/8" NPT

  • 2 x 30° degree

  • 2 x 30° degree forward

  • 2 x 90° degree

  • 2 x 90° degree forward

  • Up to 100mm (4") tube sizes

  • Max working pressure 700 Bar (10,000 psi)

Lance Jet

Pump Seat

Pump Seats

40mm Large Spinier Jet

  • 1/2" NPT

  • 3 rear

  • 4 rear

  • 6 rear

  • 8 rear

  • Grub screw to determined hole size

  • Forward, side and rear holes determined by grub screws

Adaptor

  • 1/2 BSP to 1/4 BSP

Baffle

  • Use in centaury pump

Choke

  • Used on Lance guns

Conrod

  • Use in centaury pump

  • Standard to 18mm and 20mm Piston

  • Special for 22mm Piston

Piston

  • Use in centaury pump

  • 18mm O/D

  • 20mm O/D

  • 22mm O/D

A selection of some of the water jetting compounds we have produced